Cleaning

15 March 2019

Steam vacuum cleaner: 5 mistakes to avoid during cleaning

Steam vacuum cleaner: 5 mistakes to avoid during cleaning

A steam vacuum cleaner is a valuable aid in cleaning the house: with just one tool you can remove dust and dirt, washing the surfaces with the hygienic power of steam.

Yet, during the cleaning phases, significant mistakes are often committed that risk undermining all efforts made or, even worse, causing damage around the house. If this is true even for the most antiquated and traditional cleaning methods, when steam cleaning some further tricks are required that will allow you to get flawless results without major efforts or sacrifices.

If you are lucky enough to have a steam vacuum cleaner, take note of these 5 mistakes you should never make.

  1. Not removing dust and dirt before washing

In domestic cleaning, it is a good rule to always start from the top going down.
Among the most frequent cleaning mistakes that can be done at home is definitely to start from the floor. Before washing the floors, the best advice is to first remove dirt and dust, starting with furniture, ornaments and vertical surfaces, and then get to the floor.

When using a steam cleaner, it is necessary to first vacuum to remove the most substantial dirt, then complete by activating the steam and vacuum function for washing and drying the surface. This way, you will ensure better results in terms of hygiene and cleanliness.

  1. Forgetting the steam jet setting

One of the advantages of using a steam vacuum cleaner for house cleaning is the ability to clean and sanitize a wide range of surfaces and almost all floor types.

Before using your steam cleaner, always remember to adjust the steam intensity according to the type of surface to be treated to respect even the most delicate materials. Avoid directing the steam jet on delicate objects or on surfaces that are too cold before adjusting the steam because they could be damaged due to the temperature change.

  1. Not cleaning the filter frequently

Forgetting to clean the steam vacuum cleaner's filter is certainly one of the biggest mistakes you can make. Cleaning the filter is essential not only for the correct operation of the vacuum cleaner, but also for the purposes of the final result in terms of hygiene and cleanliness of the house.

Cleaning the filters is not so complicated: in most cases it is sufficient to pass them under the tap water jet and let them dry. This operation should be carried out regularly to preserve the performance of your steam cleaner for as long as possible.

  1. Using demineralized water

Unless the manufacturer's instructions say otherwise, it is advisable to use tap water. One of the most common mistakes when using a steam vacuum cleaner is to use demineralized water. For some models of vacuum cleaners it is not recommended because it risks damaging some metal components of the boiler.

  1. Not using the right accessories

Every model of steam vacuum cleaner is always equipped with a series of very useful accessories, designed specifically to make cleaning of certain surfaces easier and more effective. One of the mistakes to avoid with the steam vacuum cleaner is not to use specific accessories, such as brushes for delicate floors, brushes for rugs and upholstery, or even suction nozzles, very useful for vacuuming dust and other debris from the most difficult surfaces.

If you are lucky enough to have them at your disposal, why don’t use them?

Polti services